This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.
Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David Carlson
MV Dottie Jean
NT32-291 (2007)
Knoxville, TN
Contact Dave Allen at the NT factory.Charlie Billingsex 26001(BeBe) & 32057 (Nobska) ownerSent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: David Carlson via Sentoa sentoa@lists.sentoa.org Date: 8/29/21 7:43 PM (GMT-08:00) To: South East Nordic Tugs Owners' Association sentoa@lists.sentoa.org Cc: David Carlson dscarlson@comcast.net Subject: [Sentoa] Deck Fill O-rings - NT32 This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David CarlsonMV Dottie JeanNT32-291 (2007)Knoxville, TN
Also looking for the o rings, went to the fill manufacturer, but they don’t sell the o rings separately a few years ago. Hope you find a source.
Carpe Diem. 37-116. 2005
Commencement Bay, Washington
Sent from my iPad
Rick Schmidtke
On Aug 29, 2021, at 7:43 PM, David Carlson via Sentoa sentoa@lists.sentoa.org wrote:
This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.
Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David Carlson
MV Dottie Jean
NT32-291 (2007)
Knoxville, TN
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Hi Rick,Have you checked with Tacoma Screw. I've seen a major selection of O-rings there.CharlieSent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Rick Schmidtke via Sentoa sentoa@lists.sentoa.org Date: 8/29/21 8:01 PM (GMT-08:00) To: "South East Nordic Tugs Owners' Association (SENTOA)" sentoa@lists.sentoa.org Cc: Rick Schmidtke fhschmidtke@gmail.com Subject: [Sentoa] Re: Deck Fill O-rings - NT32 Also looking for the o rings, went to the fill manufacturer, but they don’t sell the o rings separately a few years ago. Hope you find a source.Carpe Diem. 37-116. 2005Commencement Bay, Washington Sent from my iPadRick SchmidtkeOn Aug 29, 2021, at 7:43 PM, David Carlson via Sentoa sentoa@lists.sentoa.org wrote:This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David CarlsonMV Dottie JeanNT32-291 (2007)Knoxville, TN
_______________________________________________Sentoa mailing list -- sentoa@lists.sentoa.orgTo unsubscribe send an email to sentoa-leave@lists.sentoa.org
Take the fitting or the old o-ring to any hydraulic hose company. They will
have the correct o-ring. It is amazing how O-rings they stock. Done this
many times always got what I wanted.
On Sunday, August 29, 2021, Charles E. Billings via Sentoa <
sentoa@lists.sentoa.org> wrote:
Hi Rick,
Have you checked with Tacoma Screw. I've seen a major selection of O-rings
there.
Charlie
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Rick Schmidtke via Sentoa sentoa@lists.sentoa.org
Date: 8/29/21 8:01 PM (GMT-08:00)
To: "South East Nordic Tugs Owners' Association (SENTOA)" <
sentoa@lists.sentoa.org>
Cc: Rick Schmidtke fhschmidtke@gmail.com
Subject: [Sentoa] Re: Deck Fill O-rings - NT32
Also looking for the o rings, went to the fill manufacturer, but they
don’t sell the o rings separately a few years ago. Hope you find a source.
Carpe Diem. 37-116. 2005
Commencement Bay, Washington
Sent from my iPad
Rick Schmidtke
On Aug 29, 2021, at 7:43 PM, David Carlson via Sentoa <
sentoa@lists.sentoa.org> wrote:
This may seem like a trivial question, but I am struggling to find the
correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2))
on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but
they were a little bit oversize for the water fill and too thin for the
fuel fill.
Has anyone done the research and found the right sizes (and materials) for
all 4 deck fill o-rings?
David Carlson
MV Dottie Jean
NT32-291 (2007)
Knoxville, TN
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Any auto parts store (NAPA, etc) will have what you need. Some even have a kit of o-ring stock and can make any custom size while you wait. I replaced our two water fill o-rings with 1 1/2” diameter o-rings purchased from NAPA.
Just carefully dig out the old o-rings and take them to a parts store.
Harry Hungate
Bessie NT32-238
On Aug 30, 2021, at 12:54 PM, Paul Cleary via Sentoa sentoa@lists.sentoa.org wrote:
Take the fitting or the old o-ring to any hydraulic hose company. They will have the correct o-ring. It is amazing how O-rings they stock. Done this many times always got what I wanted.
On Sunday, August 29, 2021, Charles E. Billings via Sentoa sentoa@lists.sentoa.org wrote:
Hi Rick,
Have you checked with Tacoma Screw. I've seen a major selection of O-rings there.
Charlie
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Rick Schmidtke via Sentoa sentoa@lists.sentoa.org
Date: 8/29/21 8:01 PM (GMT-08:00)
To: "South East Nordic Tugs Owners' Association (SENTOA)" sentoa@lists.sentoa.org
Cc: Rick Schmidtke fhschmidtke@gmail.com
Subject: [Sentoa] Re: Deck Fill O-rings - NT32
Also looking for the o rings, went to the fill manufacturer, but they don’t sell the o rings separately a few years ago. Hope you find a source.
Carpe Diem. 37-116. 2005
Commencement Bay, Washington
Sent from my iPad
Rick Schmidtke
On Aug 29, 2021, at 7:43 PM, David Carlson via Sentoa sentoa@lists.sentoa.org wrote:
This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.
Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David Carlson
MV Dottie Jean
NT32-291 (2007)
Knoxville, TN
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
I ordered a "bunch" of O rings from a local company for deckfill and other items (aftercooler and Groco strainer).
The company is:
Grizzly Supplies
19269 96th Avenue
Surrey, B.C.
V4N4C4
604.251-3554
1-877-505-0155
If I have the right codes (?) the deckfills are:
Number 2-136 N70 Size: 2.00x .103 Cost: $0.29 each
Number 2-222 N70 Szie: 1.500x .139 Cost: $0.33 each
If memory serves, the deckfills are 2inch for the diesel and 1.5 inch for the waste and water (water may be 2 inch as well). I no longer own the Tug so cannot measure or access the O rings to measure. To obtain these measurements (for the first order), I sent in a sample of each O ring I wanted and the info here is from the invoice.
Being as these O rings are so inexpensive, I changed them out annually. Definitely don't want water in the fuel.
Hope that helps,
Tom Easterbrook
formerly Pilitak NT 37-068
Nanaimo, BC
From: Rick Schmidtke via Sentoa sentoa@lists.sentoa.org
Sent: August 29, 2021 8:00 PM
To: South East Nordic Tugs Owners' Association (SENTOA) sentoa@lists.sentoa.org
Cc: Rick Schmidtke fhschmidtke@gmail.com
Subject: [Sentoa] Re: Deck Fill O-rings - NT32
Also looking for the o rings, went to the fill manufacturer, but they don’t sell the o rings separately a few years ago. Hope you find a source.
Carpe Diem. 37-116. 2005
Commencement Bay, Washington
Sent from my iPad
Rick Schmidtke
On Aug 29, 2021, at 7:43 PM, David Carlson via Sentoa sentoa@lists.sentoa.org wrote:
This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.
Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David Carlson
MV Dottie Jean
NT32-291 (2007)
Knoxville, TN
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Thanks Tom
After a bit of trial and error I found the following work well for me:
I found orings in smaller quantities at The O-Ring Store online. They are cheap and I got a lifetime supply.
A size larger or smaller would probably still work.
David Carlson
865-201-3191
On Aug 30, 2021, at 15:23, Fire Fighter via Sentoa sentoa@lists.sentoa.org wrote:
I ordered a "bunch" of O rings from a local company for deckfill and other items (aftercooler and Groco strainer).
The company is:
Grizzly Supplies
19269 96th Avenue
Surrey, B.C.
V4N4C4
604.251-3554
1-877-505-0155
If I have the right codes (?) the deckfills are:
Number 2-136 N70 Size: 2.00x .103 Cost: $0.29 each
Number 2-222 N70 Szie: 1.500x .139 Cost: $0.33 each
If memory serves, the deckfills are 2inch for the diesel and 1.5 inch for the waste and water (water may be 2 inch as well). I no longer own the Tug so cannot measure or access the O rings to measure. To obtain these measurements (for the first order), I sent in a sample of each O ring I wanted and the info here is from the invoice.
Being as these O rings are so inexpensive, I changed them out annually. Definitely don't want water in the fuel.
Hope that helps,
Tom Easterbrook
formerly Pilitak NT 37-068
Nanaimo, BC
From: Rick Schmidtke via Sentoa sentoa@lists.sentoa.org
Sent: August 29, 2021 8:00 PM
To: South East Nordic Tugs Owners' Association (SENTOA) sentoa@lists.sentoa.org
Cc: Rick Schmidtke fhschmidtke@gmail.com
Subject: [Sentoa] Re: Deck Fill O-rings - NT32
Also looking for the o rings, went to the fill manufacturer, but they don’t sell the o rings separately a few years ago. Hope you find a source.
Carpe Diem. 37-116. 2005
Commencement Bay, Washington
Sent from my iPad
Rick Schmidtke
On Aug 29, 2021, at 7:43 PM, David Carlson via Sentoa sentoa@lists.sentoa.org wrote:
This may seem like a trivial question, but I am struggling to find the correct o-rings for the 4 deck fill fittings (diesel, waste, and water (2)) on my 2007 NT32. I bought the Perko 1.5 inch o-rings from West Marine but they were a little bit oversize for the water fill and too thin for the fuel fill.
Has anyone done the research and found the right sizes (and materials) for all 4 deck fill o-rings?
David Carlson
MV Dottie Jean
NT32-291 (2007)
Knoxville, TN
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org