Good Afternoon,
Working on Sea Gypsy, my NT 42-047, and need to change the TwinDisc Reduction Gear Oil.
Does anyone know the oil weight and quantity required for the change?
Thanks Very Much
Robert
My TwinDisk recommends a SAE30 single weight. I like the Lucas brand.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Jun 21, 2024, at 07:36, Robert Leviton via Sentoa sentoa@lists.sentoa.org wrote:
Good Afternoon,
Working on Sea Gypsy, my NT 42-047, and need to change the TwinDisc Reduction Gear Oil.
Does anyone know the oil weight and quantity required for the change?
Thanks Very Much
Robert
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Hi Robert—
I have 37-202 so it will be different for you, but there is a plate riveted to the gear that tells quantity and recommended weights. For mine, just for reference, it’s .85 gallons of SAE 30 or SAE 40, depending on climate. The dipstick also gives instructions for checking the level—on mine it says “engine idling in neutral” for checking the fill level.
I will also tell you—my guy at Mill Log (mfr of the Twin Disc) told me it’s fine to run 15W40 if you wish to keep a single type of oil on the boat (i.e. same as genset and main), IF you change it annually, and do not exceed 500 hours between changes.
Cheers!
Ben
On Jun 21, 2024, at 07:36, Robert Leviton via Sentoa sentoa@lists.sentoa.org wrote:
Good Afternoon,
Working on Sea Gypsy, my NT 42-047, and need to change the TwinDisc Reduction Gear Oil.
Does anyone know the oil weight and quantity required for the change?
Thanks Very Much
Robert
Sentoa mailing list -- sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org mailto:sentoa-leave@lists.sentoa.org
My NT37-199 Twin Disc uses Shell Rotella T 30W. Your plate on the Tein Disc will tell you the capacity. I believe mine is a half gallon
Stephen Hill
NT37-199
Tug’n
Sent from my iPhone
On Jun 21, 2024, at 10:36 AM, Robert Leviton via Sentoa sentoa@lists.sentoa.org wrote:
Good Afternoon,
Working on Sea Gypsy, my NT 42-047, and need to change the TwinDisc Reduction Gear Oil.
Does anyone know the oil weight and quantity required for the change?
Thanks Very Much
Robert
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org