Hi James.

I recently replaced my wiper arms.

Getting the splined cone nut off proved to be a challenge.

I used this gear puller with good success.

-evan

NT 37-148

TUGAWAY

Victoria,BC

Sent from my iPhone

(please excuse the typos...)

On Aug 31, 2026, at 17:32, Margaret Leahy via Sentoa <sentoa@lists.sentoa.org> wrote:

Hubby says to soak it with WD-40 for several days. NT 32-204

Mike

Sent from Margaret's iPhone

On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <sentoa@lists.sentoa.org> wrote:

While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk

Crown Prince

Brentwood Bay, BC

32-191

On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:

Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????

Thanks for your help.

<Wiper 1.jpeg>

<Wiper 2.jpeg>

James

James

“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”

_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

Would not recommend the one below.
Bought it and found it was too small for this project.
Try the AutoZone item from OEMTOOLS, part 25339
-Robert
Tiramisu
NT 42-047

From: David Carlson via Sentoa sentoa@lists.sentoa.org
Sent: Monday, August 31, 2026 8:50 PM
To: sentoa@lists.sentoa.org
Cc: sentoa@lists.sentoa.org; David Carlson david.s.carlson@gmail.com
Subject: [Sentoa] Re: 2002 NT 32212 Window Wipers

Don’t cut it off use a wiper puller.
[cid:image001.jpg@01DD39F9.6DF4C2A0]

David Carlson
865-201-3191

On Aug 31, 2026, at 19:40, david.boyuka--- via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org> wrote:

I used a small gear puller to remove the arms.  They came off easily without damaging the splines.

David Boyuka
“Tina Marie”
42 Nordic Tug

From: James Trickett via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org>
Sent: Monday, August 31, 2026 8:11 PM
To: sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
Cc: James Trickett <jamestrickett88@gmail.commailto:jamestrickett88@gmail.com>
Subject: [Sentoa] 2002 NT 32212 Window Wipers

Good afternoon everyone.  I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything.  Not saying that I have ever done such a thing in the past.  Following is what I see.  I am not sure what is in the hole, a screw, a ??????

Thanks for your help.

<image001.jpg>

<image002.jpg>

James

James

“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies.  Thank you.”

Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org

Check out this weblink to AMEquimenthttps://www.amequipment.com/product-category/product-type/wiper-kits-components/

If you wiper  motor still functions, I ordered the Pivot Shaft Hardware Kit, everything reassembled well with three “newly” functional wiper units. Look at the Pivot Shaft Assembly for an idea how everything is assembled.

Robert
Tiramisu
NT42-047
From: Robert Leviton via Sentoa sentoa@lists.sentoa.org
Sent: Tuesday, September 1, 2026 10:06 AM
To: South East Nordic Tugs Owners' Association (SENTOA) sentoa@lists.sentoa.org
Cc: David Carlson david.s.carlson@gmail.com; Robert Leviton Robert@RobertLeviton.com
Subject: [Sentoa] Re: 2002 NT 32212 Window Wipers

Would not recommend the one below.
Bought it and found it was too small for this project.
Try the AutoZone item from OEMTOOLS, part 25339
-Robert
Tiramisu
NT 42-047

From: David Carlson via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org>
Sent: Monday, August 31, 2026 8:50 PM
To: sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
Cc: sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org; David Carlson <david.s.carlson@gmail.commailto:david.s.carlson@gmail.com>
Subject: [Sentoa] Re: 2002 NT 32212 Window Wipers

Don’t cut it off use a wiper puller.
[cid:image001.jpg@01DD39FA.6E402E10]

David Carlson
865-201-3191

On Aug 31, 2026, at 19:40, david.boyuka--- via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org> wrote:

I used a small gear puller to remove the arms.  They came off easily without damaging the splines.

David Boyuka
“Tina Marie”
42 Nordic Tug

From: James Trickett via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org>
Sent: Monday, August 31, 2026 8:11 PM
To: sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
Cc: James Trickett <jamestrickett88@gmail.commailto:jamestrickett88@gmail.com>
Subject: [Sentoa] 2002 NT 32212 Window Wipers

Good afternoon everyone.  I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything.  Not saying that I have ever done such a thing in the past.  Following is what I see.  I am not sure what is in the hole, a screw, a ??????

Thanks for your help.

<image001.jpg>

<image002.jpg>

James

James

“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies.  Thank you.”

Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org