Dave,
I want to thank you for steering me to Seaview for a new mast. They did a
perfect job for our needs with a custom-built mast. I also might mention
how it was installed. I used stainless 3/8" wood nuts and heavily epoxied
them in and then seated the mast on a bed of 5200. It seems to be very
solidly anchored and I avoided taking the headliner out. The previous mast
was put in with what looked like 3/8" sheet metal screws and 5200 but I
could find nothing like the screws. The new method should be equally
strong.
Tom Wolf
NT 32-301
Thank You. It's nice to hear when things turn good so we appreciate you
letting us know. Best wishes this upcoming boating season.
On Tue, May 6, 2025 at 12:45 PM Tom Wolf via Sentoa sentoa@lists.sentoa.org
wrote:
Dave,
I want to thank you for steering me to Seaview for a new mast. They did a
perfect job for our needs with a custom-built mast. I also might mention
how it was installed. I used stainless 3/8” wood nuts and heavily epoxied
them in and then seated the mast on a bed of 5200. It seems to be very
solidly anchored and I avoided taking the headliner out. The previous mast
was put in with what looked like 3/8” sheet metal screws and 5200 but I
could find nothing like the screws. The new method should be equally
strong.
Tom Wolf
NT 32-301
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
--
Sincerely,
Dave Allen
Director of Product Support
Nordic Tugs, Inc. & Ocean Sport Boats
Office: 360.757.8847
Direct: 360.757.8833
Email: davea@nordictugs.com
NOTICE: This email may contain confidential or privileged material and is
intended for use solely by the above-referenced recipient. Any review,
copying, printing, disclosure, distribution, or other use by any other
person or entity is strictly prohibited. If you are not the named
recipient, or believe you have received this email in error, please reply
to the sender and delete the copy you received. Thank you.