A few years ago I made new teak ply panels for my refrigerator
and freezer. I had to buy a 4'x8' piece of teak plywood, and I have enough
left over to make two more sets. I'd be happy to sell you some, cut to
size to fit the doors. Let me know if interested.
Peter
Pearl
NT37-209
Peter C. Jenkin
Certified Management Accountant
26 Essex Glen Drive
Essex, CT 06426
(860) 662-4860 (H)
(203) 606-5028 (C)
On Thu, Sep 12, 2024 at 9:25 AM sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.org
To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.org
You can reach the person managing the list at
sentoa-owner@lists.sentoa.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."
Today's Topics:
1. Re: Cabinet/drawers (Paul Bulk)
2. Re: Cabinet/drawers (philiplgarrett@live.com)
3. Re: Cabinet/drawers (Jonathan Handelman)
4. Re: Cabinet/drawers (Richard Cohen)
Message: 1
Date: Wed, 11 Sep 2024 09:06:06 -0700
From: Paul Bulk crownprincenordic32@gmail.com
Subject: [Sentoa] Re: Cabinet/drawers
To: "South East Nordic Tugs Owners' Association (SENTOA)"
sentoa@lists.sentoa.org
Cc: Jonathan Handelman jonathan.handelman@gmail.com
Message-ID: C8C5B803-380D-4D29-8F1E-A2D6F8A1F827@gmail.com
Content-Type: multipart/alternative;
boundary=Apple-Mail-56703391-2A3A-41FE-873F-8B920764A05D
I can’t help you on the cabinet fronts but it did replace the fridge and
freezer fronts. 2 bolts to remove the doors and then take out the 2 screws
on the bottom trim. Then the panel will slide out. They are about 1/8”
thick so you can probably cut a piece of teak veneer ply. I replaced my
teak ones with magnetic stainless.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Sep 11, 2024, at 06:53, Jonathan Handelman via Sentoa <
sentoa@lists.sentoa.org> wrote:
Good morning everyone,
I'm looking into converting the forward starboard galley cabinet (below
the single drawer) into two more big drawers like the bottom starboard
drawer aft of the oven in this picture.
Does anyone know how I would go about getting matching drawers/drawer
fronts? If all I can get is fronts I can make the boxes and slides. But
buying two of the bigger fronts, drawers, and slides would be ideal. And I
recognize that the space isn't identical to the one aft of the stove, but I
think I could manage.
While I'm on the subject of the galley, has anyone converted the black
plastic front on the refrigerator to wood? Is it possible to take the
trim/frame off and just swap out the plastic for teak veneer?
-Jonathan Handelman
Cyclops
Freeport, Maine
NT-37 #138
<NT37 galley.pdf>
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org