Herb
Thanks for all the details. I have a few questions. Did you supply inverter power to the complete AC System on the vessel and you turn on the breaker you wish to power? Does this newly installed system supply power, or can it, when the shore power is connected. Another words, can both AC shore and inverter power supply service at the same time or do you have to make sure the inverter is off while on shore? Was the inverter you installed a pass through model?
Stay Well Brig
Www.yourcaptainconcierge.com
On Jan 3, 2022, at 3:30 AM, sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.org
To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.org
You can reach the person managing the list at
sentoa-owner@lists.sentoa.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."
Today's Topics:
Message: 1
Date: Sun, 2 Jan 2022 17:06:54 -0500
From: Herb Nickles herb.nickles@gmail.com
Subject: [Sentoa] Inverter Installation Instructions on SENTOA Website
To: SENTOA sentoa@lists.sentoa.org
Message-ID: 13EA8DDA-75A7-4952-8475-60AD7924B5AB@gmail.com
Content-Type: multipart/alternative;
boundary="Apple-Mail=_7AB9F0AC-655C-4544-BEB6-719F659B1AF9"
Dear Subscribers:
I just posted a new article in the Maintenance Tips section of the SENTOA website. The article was submitted by Mike Stern (Unwind, 32-254) who installed a 2000 watt Xantrex inverter in lieu of a generator. The article includes bulleted instructions, clearly labeled photos and a wiring diagram.
http://sentoa.org/maintenance_tips/inverter.html http://sentoa.org/maintenance_tips/inverter.html
Herb Nickles
SENTOA Listserver Administrator
Brig,
I didn’t write the article. Mike Stern wrote the article. You can contact him at eandmstern@gmail.com mailto:eandmstern@gmail.com for answers to your questions. However, the way I understand his article is that he fed the AC out from the inverter into the breaker panel where his generator was connected (generator previously removed). So whatever AC was run by the generator would now be run by the inverter (probably all of the AC circuits).
I installed a Xantrex 2000 on 32-225 in 2008 because the previous owner didn’t install a generator. At the same time, I installed solar panels, solar charging unit and additional house batteries. I don’t quite remember the details (I don’t own the boat anymore) but the Xantrex shut off automatically when shore power was connected. I didn’t need to throw any switches.
Herb
On Jan 3, 2022, at 7:32 AM, Captain Brig via Sentoa sentoa@lists.sentoa.org wrote:
Herb
Thanks for all the details. I have a few questions. Did you supply inverter power to the complete AC System on the vessel and you turn on the breaker you wish to power? Does this newly installed system supply power, or can it, when the shore power is connected. Another words, can both AC shore and inverter power supply service at the same time or do you have to make sure the inverter is off while on shore? Was the inverter you installed a pass through model?
Stay Well Brig
Www.yourcaptainconcierge.com
On Jan 3, 2022, at 3:30 AM, sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.org
To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.org
You can reach the person managing the list at
sentoa-owner@lists.sentoa.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."
Today's Topics:
Message: 1
Date: Sun, 2 Jan 2022 17:06:54 -0500
From: Herb Nickles herb.nickles@gmail.com
Subject: [Sentoa] Inverter Installation Instructions on SENTOA Website
To: SENTOA sentoa@lists.sentoa.org
Message-ID: 13EA8DDA-75A7-4952-8475-60AD7924B5AB@gmail.com
Content-Type: multipart/alternative;
boundary="Apple-Mail=_7AB9F0AC-655C-4544-BEB6-719F659B1AF9"
Dear Subscribers:
I just posted a new article in the Maintenance Tips section of the SENTOA website. The article was submitted by Mike Stern (Unwind, 32-254) who installed a 2000 watt Xantrex inverter in lieu of a generator. The article includes bulleted instructions, clearly labeled photos and a wiring diagram.
http://sentoa.org/maintenance_tips/inverter.html http://sentoa.org/maintenance_tips/inverter.html
Herb Nickles
SENTOA Listserver Administrator
We've owned 3 power boats that had factory optioned inverter/chargers
(including our NT-37.) In each case, the inverter only powered the 120vac
outlets and the microwave. If shore power was present, shore power was
passed through and powered those loads. If shore power was lost, the
inverter could either automatically or manually power the loads depending
on how it was set.
If the inverter was wired to be able to power all the AC loads it could
easily or accidently be overpowered. (Think large switched loads like the
water heater, electric cooktop, aircon's, etc.) This would be a concern not
only for the inverter, but also the loads. I can't speak specifically to
the NT-32, but if the inverter was originally offered as an option then it
would be likely that the distribution panel was set up with a jumpered
"inverter bus." Easy enough to check on the (excellent) NT schematics and
utilize if present.
Jim Waskowich
ex owner 2006 NT37, Grand Adventure
On Mon, Jan 3, 2022 at 8:42 AM Herb Nickles via Sentoa <
sentoa@lists.sentoa.org> wrote:
Brig,
I didn’t write the article. Mike Stern wrote the article. You can
contact him at eandmstern@gmail.com for answers to your questions.
However, the way I understand his article is that he fed the AC out from
the inverter into the breaker panel where his generator was connected
(generator previously removed). So whatever AC was run by the generator
would now be run by the inverter (probably all of the AC circuits).
I installed a Xantrex 2000 on 32-225 in 2008 because the previous owner
didn’t install a generator. At the same time, I installed solar panels,
solar charging unit and additional house batteries. I don’t quite remember
the details (I don’t own the boat anymore) but the Xantrex shut off
automatically when shore power was connected. I didn’t need to throw any
switches.
Herb
On Jan 3, 2022, at 7:32 AM, Captain Brig via Sentoa <
sentoa@lists.sentoa.org> wrote:
Herb
Thanks for all the details. I have a few questions. Did you supply
inverter power to the complete AC System on the vessel and you turn on the
breaker you wish to power? Does this newly installed system supply power,
or can it, when the shore power is connected. Another words, can both AC
shore and inverter power supply service at the same time or do you have to
make sure the inverter is off while on shore? Was the inverter you
installed a pass through model?
Stay Well Brig
Www.yourcaptainconcierge.com
On Jan 3, 2022, at 3:30 AM, sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.org
To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.org
You can reach the person managing the list at
sentoa-owner@lists.sentoa.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."
Today's Topics:
Message: 1
Date: Sun, 2 Jan 2022 17:06:54 -0500
From: Herb Nickles herb.nickles@gmail.com
Subject: [Sentoa] Inverter Installation Instructions on SENTOA Website
To: SENTOA sentoa@lists.sentoa.org
Message-ID: 13EA8DDA-75A7-4952-8475-60AD7924B5AB@gmail.com
Content-Type: multipart/alternative;
boundary="Apple-Mail=_7AB9F0AC-655C-4544-BEB6-719F659B1AF9"
Dear Subscribers:
I just posted a new article in the Maintenance Tips section of the SENTOA
website. The article was submitted by Mike Stern (Unwind, 32-254) who
installed a 2000 watt Xantrex inverter in lieu of a generator. The article
includes bulleted instructions, clearly labeled photos and a wiring
diagram.
http://sentoa.org/maintenance_tips/inverter.html <
http://sentoa.org/maintenance_tips/inverter.html>
Herb Nickles
SENTOA Listserver Administrator
I totally agree with Jim. We added a Magnum Inverter/Charger to our NT 37-100 (2004) boat. It has a separate panel for 120V outlets and the microwave. Our hot water/built in King heater/water maker (big loads) are not on the inverter panel – for all the reasons previously stated.
In our case – the vessel was pre-wired for the optional inverter, and we had an electrician install the Magnum and verify the configuration. One of the best upgrades we put on the boat.
David Cheyette
Maisy
NT37-100
Anacortes
From: Jim Waskowich via Sentoa sentoa@lists.sentoa.org
Sent: Monday, January 3, 2022 7:58 AM
To: South East Nordic Tugs Owners' Association (SENTOA) sentoa@lists.sentoa.org
Cc: Jim Waskowich jwaskowi@gmail.com
Subject: [Sentoa] Re: Sentoa Digest, Vol 127, Issue 26
We've owned 3 power boats that had factory optioned inverter/chargers (including our NT-37.) In each case, the inverter only powered the 120vac outlets and the microwave. If shore power was present, shore power was passed through and powered those loads. If shore power was lost, the inverter could either automatically or manually power the loads depending on how it was set.
If the inverter was wired to be able to power all the AC loads it could easily or accidently be overpowered. (Think large switched loads like the water heater, electric cooktop, aircon's, etc.) This would be a concern not only for the inverter, but also the loads. I can't speak specifically to the NT-32, but if the inverter was originally offered as an option then it would be likely that the distribution panel was set up with a jumpered "inverter bus." Easy enough to check on the (excellent) NT schematics and utilize if present.
Jim Waskowich
ex owner 2006 NT37, Grand Adventure
On Mon, Jan 3, 2022 at 8:42 AM Herb Nickles via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org> wrote:
Brig,
I didn’t write the article. Mike Stern wrote the article. You can contact him at eandmstern@gmail.commailto:eandmstern@gmail.com for answers to your questions. However, the way I understand his article is that he fed the AC out from the inverter into the breaker panel where his generator was connected (generator previously removed). So whatever AC was run by the generator would now be run by the inverter (probably all of the AC circuits).
I installed a Xantrex 2000 on 32-225 in 2008 because the previous owner didn’t install a generator. At the same time, I installed solar panels, solar charging unit and additional house batteries. I don’t quite remember the details (I don’t own the boat anymore) but the Xantrex shut off automatically when shore power was connected. I didn’t need to throw any switches.
Herb
On Jan 3, 2022, at 7:32 AM, Captain Brig via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org> wrote:
Herb
Thanks for all the details. I have a few questions. Did you supply inverter power to the complete AC System on the vessel and you turn on the breaker you wish to power? Does this newly installed system supply power, or can it, when the shore power is connected. Another words, can both AC shore and inverter power supply service at the same time or do you have to make sure the inverter is off while on shore? Was the inverter you installed a pass through model?
Stay Well Brig
Www.yourcaptainconcierge.comhttp://Www.yourcaptainconcierge.com
On Jan 3, 2022, at 3:30 AM, sentoa-request@lists.sentoa.orgmailto:sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.orgmailto:sentoa-request@lists.sentoa.org
You can reach the person managing the list at
sentoa-owner@lists.sentoa.orgmailto:sentoa-owner@lists.sentoa.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."
Today's Topics:
Message: 1
Date: Sun, 2 Jan 2022 17:06:54 -0500
From: Herb Nickles <herb.nickles@gmail.commailto:herb.nickles@gmail.com>
Subject: [Sentoa] Inverter Installation Instructions on SENTOA Website
To: SENTOA <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org>
Message-ID: <13EA8DDA-75A7-4952-8475-60AD7924B5AB@gmail.commailto:13EA8DDA-75A7-4952-8475-60AD7924B5AB@gmail.com>
Content-Type: multipart/alternative;
boundary="Apple-Mail=_7AB9F0AC-655C-4544-BEB6-719F659B1AF9"
Dear Subscribers:
I just posted a new article in the Maintenance Tips section of the SENTOA website. The article was submitted by Mike Stern (Unwind, 32-254) who installed a 2000 watt Xantrex inverter in lieu of a generator. The article includes bulleted instructions, clearly labeled photos and a wiring diagram.
http://sentoa.org/maintenance_tips/inverter.html http://sentoa.org/maintenance_tips/inverter.html
Herb Nickles
SENTOA Listserver Administrator-------------- next part --------------
A message part incompatible with plain text digests has been removed ...
Name: not available
Type: text/html
Size: 989 bytes
Desc: not available
Subject: Digest Footer
Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org
End of Sentoa Digest, Vol 127, Issue 26
Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org