Where does the fiberglass anchor pulpits come from, if you wanted a dual anchor roller? Dave Bell Escapade 37-058 > On May 9, 2018, at 1:47 PM, Al Johnson <johnson.alan.b@gmail.com> wrote: > > Excellent information, Dave. > > Thanks so much. > > Al > >> On Wed, May 9, 2018 at 12:02 PM, Dave Allen <davea@nordictugs.com> wrote: >> The material used for the mid-guard, shear trim and anchor guard all come from Barbour Plastics (Integrity Marine) Barbour plastics has a catalog on their web site with pictures and part numbers of their materials. >> >> >> >> Feel free to contact Mark Demers directly at Barbour Plastics (Integrity Marine) >> >> >> >> http://barbourplastics.com/marine-extrusions/ >> Contact: Mark Demers @ 508.897.8339 >> Email: mdemers@barbourplastics.com >> >> >> >> Anchor Guard Model Number: R1004-20’ (Black) >> >> Rubrail, Mid-Guard (2.5”x12’ Black) Model Number: R1558-25’ >> >> Rubrail, Mid Guard (3”x25’ Black) Model Number: R1559-25’ >> >> Shear Trim, Black, Pre0drilled, 55’ Model Number: F2379-55’ >> >> >> >> Please verify with the supplier nefore purchasing the material to make sure it is what you want. It is possible there was a different source for this material back in 1984 but this should have what you need. >> >> >> >> Sincerely, >> >> >> >> Dave Allen >> >> Ph: 360.757.8833 >> >> >> >> www.nordictugs.com >> >> Facebook: Nordic Tugs - Factory >> >> >> >> NOTICE: This email may contain confidential or privileged material and is intended for use solely by the above-referenced recipient. Any review, copying, printing, disclosure, distribution, or other use by any other person or entity is strictly prohibited. If you are not the named recipient, or believe you have received this email in error, please reply to the sender and delete the copy you received. Thank you. >> >> >> >> >> >> >> >> From: Al Johnson [mailto:johnson.alan.b@gmail.com] >> Sent: Wednesday, May 09, 2018 8:44 AM >> To: South East Nordic Tugs Owners' Association (SENTOA) >> Subject: Anchor Guard? >> >> >> >> Hello Tuggers >> >> I'm getting ready to paint the hull on my 1984 NT 26 and am looking for a few products I've seen on boats similar to my size/vintage. >> >> I've seen numerous tugs with an added rub rail, as well as a segmented anchor guard (for the bow). Can anyone provide me with your sources for these two products? >> >> Thanks >> >> >> >> Al Johnson >> >> Nuthin' Fancy >> 26-088 >> >

We manufacture the fiberglass pulpits. Send me an email separately if your wanting pricing. Sincerely, Dave Allen Nordic Tugs, INC davea@nordictugs.com www.nordictugs.com Facebook: Nordic Tugs Factory > On May 9, 2018, at 12:29 PM, David Bell <pgisailor@gmail.com> wrote: > > Where does the fiberglass anchor pulpits come from, if you wanted a dual anchor roller? > Dave Bell > Escapade > 37-058 > >> On May 9, 2018, at 1:47 PM, Al Johnson <johnson.alan.b@gmail.com> wrote: >> >> Excellent information, Dave. >> >> Thanks so much. >> >> Al >> >>> On Wed, May 9, 2018 at 12:02 PM, Dave Allen <davea@nordictugs.com> wrote: >>> The material used for the mid-guard, shear trim and anchor guard all come from Barbour Plastics (Integrity Marine) Barbour plastics has a catalog on their web site with pictures and part numbers of their materials. >>> >>> >>> >>> Feel free to contact Mark Demers directly at Barbour Plastics (Integrity Marine) >>> >>> >>> >>> http://barbourplastics.com/marine-extrusions/ >>> Contact: Mark Demers @ 508.897.8339 >>> Email: mdemers@barbourplastics.com >>> >>> >>> >>> Anchor Guard Model Number: R1004-20’ (Black) >>> >>> Rubrail, Mid-Guard (2.5”x12’ Black) Model Number: R1558-25’ >>> >>> Rubrail, Mid Guard (3”x25’ Black) Model Number: R1559-25’ >>> >>> Shear Trim, Black, Pre0drilled, 55’ Model Number: F2379-55’ >>> >>> >>> >>> Please verify with the supplier nefore purchasing the material to make sure it is what you want. It is possible there was a different source for this material back in 1984 but this should have what you need. >>> >>> >>> >>> Sincerely, >>> >>> >>> >>> Dave Allen >>> >>> Ph: 360.757.8833 >>> >>> >>> >>> www.nordictugs.com >>> >>> Facebook: Nordic Tugs - Factory >>> >>> >>> >>> NOTICE: This email may contain confidential or privileged material and is intended for use solely by the above-referenced recipient. Any review, copying, printing, disclosure, distribution, or other use by any other person or entity is strictly prohibited. If you are not the named recipient, or believe you have received this email in error, please reply to the sender and delete the copy you received. Thank you. >>> >>> >>> >>> >>> >>> >>> >>> From: Al Johnson [mailto:johnson.alan.b@gmail.com] >>> Sent: Wednesday, May 09, 2018 8:44 AM >>> To: South East Nordic Tugs Owners' Association (SENTOA) >>> Subject: Anchor Guard? >>> >>> >>> >>> Hello Tuggers >>> >>> I'm getting ready to paint the hull on my 1984 NT 26 and am looking for a few products I've seen on boats similar to my size/vintage. >>> >>> I've seen numerous tugs with an added rub rail, as well as a segmented anchor guard (for the bow). Can anyone provide me with your sources for these two products? >>> >>> Thanks >>> >>> >>> >>> Al Johnson >>> >>> Nuthin' Fancy >>> 26-088 >>> >>