Actually, when I look at fisheries supply at the regular cutless bearings they ask for an outside bearing diameter and a shaft diameter. If you have those two pieces of information, I think you might be golden. So far, I do not see an option to specify the length. In other words, I think that they come in a single length for any particular combination of outside diameters.
b
Sent from my iPhone
On Feb 16, 2025, at 16:41, Ben McCafferty bmacpiper@me.com wrote:
Hi Jim,
I don’t have your same boat so I’m not sure whether you can see the forward bearing or not. On my 37 I can, and the bearing protrudes about a half an inch into the bilge. If that is the case on yours also, you could certainly measure the outside diameter of the existing Cutless bearing as a starting point. Someone else will need to guide you on the length of the bearings. Maybe Dave Allen at Nordic Tugs if no one here already knows?
b
Sent from my iPhone
On Feb 16, 2025, at 14:19, Jim Pearson via Sentoa sentoa@lists.sentoa.org wrote:
Can anyone tell me what size Cutless bearing I need as well as the shaft log diameter for a 1999 NT - 32. I’d like to order everything up before I have the boat hauled.
Thank you
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Actually, when I look at fisheries supply at the regular cutless bearings they ask for an outside bearing diameter and a shaft diameter. If you have those two pieces of information, I think you might be golden. So far, I do not see an option to specify the length. In other words, I think that they come in a single length for any particular combination of outside diameters.
b
Sent from my iPhone
> On Feb 16, 2025, at 16:41, Ben McCafferty <bmacpiper@me.com> wrote:
>
> Hi Jim,
>
> I don’t have your same boat so I’m not sure whether you can see the forward bearing or not. On my 37 I can, and the bearing protrudes about a half an inch into the bilge. If that is the case on yours also, you could certainly measure the outside diameter of the existing Cutless bearing as a starting point. Someone else will need to guide you on the length of the bearings. Maybe Dave Allen at Nordic Tugs if no one here already knows?
> b
> Sent from my iPhone
>
>> On Feb 16, 2025, at 14:19, Jim Pearson via Sentoa <sentoa@lists.sentoa.org> wrote:
>>
>> Can anyone tell me what size Cutless bearing I need as well as the shaft log diameter for a 1999 NT - 32. I’d like to order everything up before I have the boat hauled.
>> Thank you
>> _______________________________________________
>> Sentoa mailing list -- sentoa@lists.sentoa.org
>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
