Re: Sentoa Digest, Vol 170, Issue 1 NT 37 fuel tank leak
I own 2007. 37-181. Experienced the same problem 5 years ago. Found that the hose clamps on the tanks fill hose were not tight so when the tank was completely full I was getting some minor fuel leaking. Due to the location of the tank fill i was fortunately able to use about 4 feet of socket extensions connected together and was able to reach the clamps to tighten them (it was not an easy job)
Regards
Torben
NT 37-181
On Jul 16, 2025, at 13:53, sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.org
To subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.org
You can reach the person managing the list at
sentoa-owner@lists.sentoa.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."
Today's Topics:
- Re: NT 32 Salon Hatch Weather Stripping / Gasket (Ryan LaFountain)
- Re: 2007 NT37 - Fuel tanks (bmacpiper@me.com)
- Re: 2007 NT37 - Fuel tanks (Rick Schmidtke)
- Re: 2007 NT37 - Fuel tanks (bmacpiper@me.com)
- Re: 2007 NT37 - Fuel tanks (bmacpiper@me.com)
Message: 1
Date: Wed, 16 Jul 2025 10:42:19 -0400
From: Ryan LaFountain ryan.adam.lafountain@gmail.com
Subject: [Sentoa] Re: NT 32 Salon Hatch Weather Stripping / Gasket
To: David Carlson dscarlson@comcast.net
Cc: SENTOA sentoa@lists.sentoa.org
Message-ID:
CAGgb=TmR5+UR5QH0zdhVNuLCXM-vL4kTd3PbiBUU17G=ObhhMA@mail.gmail.com
Content-Type: multipart/alternative;
boundary="0000000000000786e9063a0ce7cb"
Thanks David.
PN 103023 doesn't look like either of the two profiles that are on the
hatch now. It's possible someone replaced it with something else along the
way.
Did you use this on the front of the hatch (where it meets the door) in
addition to the sides and the back (hinge-side)?
Do you have pictures of it installed?
Thanks,
Ryan
On Mon, Jul 7, 2025 at 4:20 PM David Carlson dscarlson@comcast.net wrote:
See item #2 on attachment for weather stripping. Or talk to Buffy.
See attached door drawing. Not your door but should be similar.
On Jul 7, 2025, at 11:26, Ryan LaFountain via Sentoa <
sentoa@lists.sentoa.org> wrote:Greetings,
I'm replacing the gas struts on my 2007 NT 32 salon hatch (above the rear
door) and the weather stripping / gasket is probably also in need of
replacement.It looks like around the hinge edge and two sides seem to be 3/4" wide
and ~1/2" deep. The front seems to be similar, just oriented differently,
maybe 1/2" wide and 3/4" tall.I assume these are from Diamond Sea Glaze but I'm having trouble matching
the exact part numbers.Has anyone replaced this before? If so, do you have the part numbers you
used?Bonus if you have the PN for the gasket for the rear door as well.
Thanks,
Ryan
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Thanks Torben!
I’ll look again, so far not finding any diesel there. But at least I have access behind the sink if needed, easier than 4 feet of extensions! (Impressive, by the way…)
b
On Jul 16, 2025, at 16:42, Torben Mann via Sentoa sentoa@lists.sentoa.org wrote:
I own 2007. 37-181. Experienced the same problem 5 years ago. Found that the hose clamps on the tanks fill hose were not tight so when the tank was completely full I was getting some minor fuel leaking. Due to the location of the tank fill i was fortunately able to use about 4 feet of socket extensions connected together and was able to reach the clamps to tighten them (it was not an easy job)
Regards
Torben
NT 37-181
On Jul 16, 2025, at 13:53, sentoa-request@lists.sentoa.org wrote:
Send Sentoa mailing list submissions to
sentoa@lists.sentoa.orgTo subscribe or unsubscribe via email, send a message with subject or
body 'help' to
sentoa-request@lists.sentoa.orgYou can reach the person managing the list at
sentoa-owner@lists.sentoa.orgWhen replying, please edit your Subject line so it is more specific
than "Re: Contents of Sentoa digest..."Today's Topics:
- Re: NT 32 Salon Hatch Weather Stripping / Gasket (Ryan LaFountain)
- Re: 2007 NT37 - Fuel tanks (bmacpiper@me.com)
- Re: 2007 NT37 - Fuel tanks (Rick Schmidtke)
- Re: 2007 NT37 - Fuel tanks (bmacpiper@me.com)
- Re: 2007 NT37 - Fuel tanks (bmacpiper@me.com)
Message: 1
Date: Wed, 16 Jul 2025 10:42:19 -0400
From: Ryan LaFountain ryan.adam.lafountain@gmail.com
Subject: [Sentoa] Re: NT 32 Salon Hatch Weather Stripping / Gasket
To: David Carlson dscarlson@comcast.net
Cc: SENTOA sentoa@lists.sentoa.org
Message-ID:
CAGgb=TmR5+UR5QH0zdhVNuLCXM-vL4kTd3PbiBUU17G=ObhhMA@mail.gmail.com
Content-Type: multipart/alternative;
boundary="0000000000000786e9063a0ce7cb"Thanks David.
PN 103023 doesn't look like either of the two profiles that are on the
hatch now. It's possible someone replaced it with something else along the
way.Did you use this on the front of the hatch (where it meets the door) in
addition to the sides and the back (hinge-side)?Do you have pictures of it installed?
Thanks,
RyanOn Mon, Jul 7, 2025 at 4:20 PM David Carlson dscarlson@comcast.net wrote:
See item #2 on attachment for weather stripping. Or talk to Buffy.
See attached door drawing. Not your door but should be similar.
On Jul 7, 2025, at 11:26, Ryan LaFountain via Sentoa <
sentoa@lists.sentoa.org> wrote:Greetings,
I'm replacing the gas struts on my 2007 NT 32 salon hatch (above the rear
door) and the weather stripping / gasket is probably also in need of
replacement.It looks like around the hinge edge and two sides seem to be 3/4" wide
and ~1/2" deep. The front seems to be similar, just oriented differently,
maybe 1/2" wide and 3/4" tall.I assume these are from Diamond Sea Glaze but I'm having trouble matching
the exact part numbers.Has anyone replaced this before? If so, do you have the part numbers you
used?Bonus if you have the PN for the gasket for the rear door as well.
Thanks,
Ryan
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org