Thanks David.
PN 103023 doesn't look like either of the two profiles that are on the
hatch now. It's possible someone replaced it with something else along the
way.
Did you use this on the front of the hatch (where it meets the door) in
addition to the sides and the back (hinge-side)?
Do you have pictures of it installed?
Thanks,
Ryan
On Mon, Jul 7, 2025 at 4:20 PM David Carlson dscarlson@comcast.net wrote:
See item #2 on attachment for weather stripping. Or talk to Buffy.
See attached door drawing. Not your door but should be similar.
On Jul 7, 2025, at 11:26, Ryan LaFountain via Sentoa <
sentoa@lists.sentoa.org> wrote:
Greetings,
I'm replacing the gas struts on my 2007 NT 32 salon hatch (above the rear
door) and the weather stripping / gasket is probably also in need of
replacement.
It looks like around the hinge edge and two sides seem to be 3/4" wide
and ~1/2" deep. The front seems to be similar, just oriented differently,
maybe 1/2" wide and 3/4" tall.
I assume these are from Diamond Sea Glaze but I'm having trouble matching
the exact part numbers.
Has anyone replaced this before? If so, do you have the part numbers you
used?
Bonus if you have the PN for the gasket for the rear door as well.
Thanks,
Ryan
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Thanks David.
PN 103023 doesn't look like either of the two profiles that are on the
hatch now. It's possible someone replaced it with something else along the
way.
Did you use this on the front of the hatch (where it meets the door) in
addition to the sides and the back (hinge-side)?
Do you have pictures of it installed?
Thanks,
Ryan
On Mon, Jul 7, 2025 at 4:20 PM David Carlson <dscarlson@comcast.net> wrote:
> See item #2 on attachment for weather stripping. Or talk to Buffy.
>
>
> See attached door drawing. Not your door but should be similar.
>
>
> On Jul 7, 2025, at 11:26, Ryan LaFountain via Sentoa <
> sentoa@lists.sentoa.org> wrote:
>
> Greetings,
>
> I'm replacing the gas struts on my 2007 NT 32 salon hatch (above the rear
> door) and the weather stripping / gasket is probably also in need of
> replacement.
>
> It looks like around the hinge edge and two sides seem to be 3/4" wide
> and ~1/2" deep. The front seems to be similar, just oriented differently,
> maybe 1/2" wide and 3/4" tall.
>
> I assume these are from Diamond Sea Glaze but I'm having trouble matching
> the exact part numbers.
>
> Has anyone replaced this before? If so, do you have the part numbers you
> used?
>
> Bonus if you have the PN for the gasket for the rear door as well.
>
> Thanks,
> Ryan
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
>
>
>
