TK

Tom Krahn

Tue, May 21, 2024 4:22 PM

Does anyone know the brand or where you could get a replacement for
the stay in the cockpit locker (the one with the propane) on a 2007
32?

Tom Krahn

Diana B.
32-285
Barrington, RI

Does anyone know the brand or where you could get a replacement for the stay in the cockpit locker (the one with the propane) on a 2007 32? Tom Krahn Diana B. 32-285 Barrington, RI

TP

Tom Patterson

Tue, May 21, 2024 5:07 PM

When I bought my NT32-251 (2005) last fall, it was missing the propane locker hold open. I measured the existing hardware hole spacing: 3/4” at bottom; 1 1/8” at lid, ~9” total spring length.

I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit perfectly.
I see there appears to be an identical product from Moonlite Marine WM Model # 414094 Mfg # 0314, 10” $18.99.

~Tom Patterson
NT32-251 (2005)
PACIFIC LOON
Pt. Richmond, CA

On May 21, 2024, at 09:22, Tom Krahn via Sentoa sentoa@lists.sentoa.org wrote:

Does anyone know the brand or where you could get a replacement for
the stay in the cockpit locker (the one with the propane) on a 2007
32?

Tom Krahn

Diana B.
32-285
Barrington, RI

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

When I bought my NT32-251 (2005) last fall, it was missing the propane locker hold open. I measured the existing hardware hole spacing: 3/4” at bottom; 1 1/8” at lid, ~9” total spring length. I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit perfectly. I see there appears to be an identical product from Moonlite Marine WM Model # 414094 Mfg # 0314, 10” $18.99. ~Tom Patterson NT32-251 (2005) PACIFIC LOON Pt. Richmond, CA > On May 21, 2024, at 09:22, Tom Krahn via Sentoa <sentoa@lists.sentoa.org> wrote: > > Does anyone know the brand or where you could get a replacement for > the stay in the cockpit locker (the one with the propane) on a 2007 > 32? > > Tom Krahn > > Diana B. > 32-285 > Barrington, RI > _______________________________________________ > Sentoa mailing list -- sentoa@lists.sentoa.org > To unsubscribe send an email to sentoa-leave@lists.sentoa.org

HH

Harry Hungate

Tue, May 21, 2024 7:40 PM

We replaced the locker stay on our NT-32-238 with a gas strut, as the spring stay, if accidentally bumped would allow the locker lid to come crashing down. Despite my careful calculations, the gas strut is not quite strong enough. We just arrived in Brewerton, NY this afternoon. Tomorrow I will take a photo of the gas strut and post it here.
Harry Hungate and Jane Lothrop
Bessie. NT 32-238

On May 21, 2024, at 1:07 PM, Tom Patterson via Sentoa sentoa@lists.sentoa.org wrote:

When I bought my NT32-251 (2005) last fall, it was missing the propane locker hold open. I measured the existing hardware hole spacing: 3/4” at bottom; 1 1/8” at lid, ~9” total spring length.

I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit perfectly.
I see there appears to be an identical product from Moonlite Marine WM Model # 414094 Mfg # 0314, 10” $18.99.

<image0.jpeg>

~Tom Patterson
NT32-251 (2005)
PACIFIC LOON
Pt. Richmond, CA

On May 21, 2024, at 09:22, Tom Krahn via Sentoa sentoa@lists.sentoa.org wrote:

Does anyone know the brand or where you could get a replacement for
the stay in the cockpit locker (the one with the propane) on a 2007
32?

Tom Krahn

Diana B.
32-285
Barrington, RI

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

We replaced the locker stay on our NT-32-238 with a gas strut, as the spring stay, if accidentally bumped would allow the locker lid to come crashing down. Despite my careful calculations, the gas strut is not quite strong enough. We just arrived in Brewerton, NY this afternoon. Tomorrow I will take a photo of the gas strut and post it here. Harry Hungate and Jane Lothrop Bessie. NT 32-238 > On May 21, 2024, at 1:07 PM, Tom Patterson via Sentoa <sentoa@lists.sentoa.org> wrote: > > When I bought my NT32-251 (2005) last fall, it was missing the propane locker hold open. I measured the existing hardware hole spacing: 3/4” at bottom; 1 1/8” at lid, ~9” total spring length. > > I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit perfectly. > I see there appears to be an identical product from Moonlite Marine WM Model # 414094 Mfg # 0314, 10” $18.99. > > <image0.jpeg> > > ~Tom Patterson > NT32-251 (2005) > PACIFIC LOON > Pt. Richmond, CA > >>> On May 21, 2024, at 09:22, Tom Krahn via Sentoa <sentoa@lists.sentoa.org> wrote: >>> >> Does anyone know the brand or where you could get a replacement for >> the stay in the cockpit locker (the one with the propane) on a 2007 >> 32? >> >> Tom Krahn >> >> Diana B. >> 32-285 >> Barrington, RI >> _______________________________________________ >> Sentoa mailing list -- sentoa@lists.sentoa.org >> To unsubscribe send an email to sentoa-leave@lists.sentoa.org > _______________________________________________ > Sentoa mailing list -- sentoa@lists.sentoa.org > To unsubscribe send an email to sentoa-leave@lists.sentoa.org

DA

Dave Allen

Tue, May 21, 2024 8:52 PM

Is this what you are looking for?
https://www.go2marine.com/search?keywords=sdl3212951

On Tue, May 21, 2024 at 12:40 PM Harry Hungate via Sentoa <
sentoa@lists.sentoa.org> wrote:

We replaced the locker stay on our NT-32-238 with a gas strut, as the
spring stay, if accidentally bumped would allow the locker lid to come
crashing down. Despite my careful calculations, the gas strut is not quite
strong enough. We just arrived in Brewerton, NY this afternoon. Tomorrow
I will take a photo of the gas strut and post it here.
Harry Hungate and Jane Lothrop
Bessie. NT 32-238

On May 21, 2024, at 1:07 PM, Tom Patterson via Sentoa <
sentoa@lists.sentoa.org> wrote:

When I bought my NT32-251 (2005) last fall, it was missing the propane
locker hold open. I measured the existing hardware hole spacing: 3/4” at
bottom; 1 1/8” at lid, ~9” total spring length.

I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit
perfectly.
I see there appears to be an identical product from Moonlite Marine WM Model

414094 Mfg # 0314, 10” $18.99.

<image0.jpeg>

~Tom Patterson
NT32-251 (2005)
PACIFIC LOON
Pt. Richmond, CA

On May 21, 2024, at 09:22, Tom Krahn via Sentoa sentoa@lists.sentoa.org
wrote:

Does anyone know the brand or where you could get a replacement for
the stay in the cockpit locker (the one with the propane) on a 2007
32?

Tom Krahn

Diana B.
32-285
Barrington, RI

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

--
Sincerely,

Dave Allen
Director of Product Support
Nordic Tugs, Inc. & Ocean Sport Boats
Office: 360.757.8847
Direct: 360.757.8833
Email: davea@nordictugs.com

NOTICE: This email may contain confidential or privileged material and is
intended for use solely by the above-referenced recipient. Any review,
copying, printing, disclosure, distribution, or other use by any other
person or entity is strictly prohibited. If you are not the named
recipient, or believe you have received this email in error, please reply
to the sender and delete the copy you received. Thank you.

Is this what you are looking for? https://www.go2marine.com/search?keywords=sdl3212951 On Tue, May 21, 2024 at 12:40 PM Harry Hungate via Sentoa < sentoa@lists.sentoa.org> wrote: > We replaced the locker stay on our NT-32-238 with a gas strut, as the > spring stay, if accidentally bumped would allow the locker lid to come > crashing down. Despite my careful calculations, the gas strut is not quite > strong enough. We just arrived in Brewerton, NY this afternoon. Tomorrow > I will take a photo of the gas strut and post it here. > Harry Hungate and Jane Lothrop > Bessie. NT 32-238 > > On May 21, 2024, at 1:07 PM, Tom Patterson via Sentoa < > sentoa@lists.sentoa.org> wrote: > > When I bought my NT32-251 (2005) last fall, it was missing the propane > locker hold open. I measured the existing hardware hole spacing: 3/4” at > bottom; 1 1/8” at lid, ~9” total spring length. > > I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit > perfectly. > I see there appears to be an identical product from Moonlite Marine WM Model > # 414094 Mfg # 0314, 10” $18.99. > > <image0.jpeg> > > ~Tom Patterson > NT32-251 (2005) > PACIFIC LOON > Pt. Richmond, CA > > On May 21, 2024, at 09:22, Tom Krahn via Sentoa <sentoa@lists.sentoa.org> > wrote: > > Does anyone know the brand or where you could get a replacement for > the stay in the cockpit locker (the one with the propane) on a 2007 > 32? > > Tom Krahn > > Diana B. > 32-285 > Barrington, RI > _______________________________________________ > Sentoa mailing list -- sentoa@lists.sentoa.org > To unsubscribe send an email to sentoa-leave@lists.sentoa.org > > _______________________________________________ > Sentoa mailing list -- sentoa@lists.sentoa.org > To unsubscribe send an email to sentoa-leave@lists.sentoa.org > > _______________________________________________ > Sentoa mailing list -- sentoa@lists.sentoa.org > To unsubscribe send an email to sentoa-leave@lists.sentoa.org > -- Sincerely, Dave Allen Director of Product Support Nordic Tugs, Inc. & Ocean Sport Boats Office: 360.757.8847 Direct: 360.757.8833 Email: davea@nordictugs.com NOTICE: This email may contain confidential or privileged material and is intended for use solely by the above-referenced recipient. Any review, copying, printing, disclosure, distribution, or other use by any other person or entity is strictly prohibited. If you are not the named recipient, or believe you have received this email in error, please reply to the sender and delete the copy you received. Thank you.

TK

Tom Krahn

Tue, May 21, 2024 9:01 PM

That's exactly it!!

Thank you,
Tom Krahn

On Tue, May 21, 2024 at 4:53 PM Dave Allen via Sentoa
sentoa@lists.sentoa.org wrote:

Is this what you are looking for?
https://www.go2marine.com/search?keywords=sdl3212951

On Tue, May 21, 2024 at 12:40 PM Harry Hungate via Sentoa sentoa@lists.sentoa.org wrote:

We replaced the locker stay on our NT-32-238 with a gas strut, as the spring stay, if accidentally bumped would allow the locker lid to come crashing down. Despite my careful calculations, the gas strut is not quite strong enough. We just arrived in Brewerton, NY this afternoon. Tomorrow I will take a photo of the gas strut and post it here.
Harry Hungate and Jane Lothrop
Bessie. NT 32-238

On May 21, 2024, at 1:07 PM, Tom Patterson via Sentoa sentoa@lists.sentoa.org wrote:

When I bought my NT32-251 (2005) last fall, it was missing the propane locker hold open. I measured the existing hardware hole spacing: 3/4” at bottom; 1 1/8” at lid, ~9” total spring length.

I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit perfectly.
I see there appears to be an identical product from Moonlite Marine WM Model # 414094 Mfg # 0314, 10” $18.99.

<image0.jpeg>

~Tom Patterson
NT32-251 (2005)
PACIFIC LOON
Pt. Richmond, CA

On May 21, 2024, at 09:22, Tom Krahn via Sentoa sentoa@lists.sentoa.org wrote:

Does anyone know the brand or where you could get a replacement for
the stay in the cockpit locker (the one with the propane) on a 2007
32?

Tom Krahn

Diana B.
32-285
Barrington, RI

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

--
Sincerely,

Dave Allen
Director of Product Support
Nordic Tugs, Inc. & Ocean Sport Boats
Office: 360.757.8847
Direct: 360.757.8833
Email: davea@nordictugs.com

NOTICE: This email may contain confidential or privileged material and is intended for use solely by the above-referenced recipient. Any review, copying, printing, disclosure, distribution, or other use by any other person or entity is strictly prohibited. If you are not the named recipient, or believe you have received this email in error, please reply to the sender and delete the copy you received. Thank you.

Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org

That's exactly it!! Thank you, Tom Krahn On Tue, May 21, 2024 at 4:53 PM Dave Allen via Sentoa <sentoa@lists.sentoa.org> wrote: > > Is this what you are looking for? > https://www.go2marine.com/search?keywords=sdl3212951 > > > On Tue, May 21, 2024 at 12:40 PM Harry Hungate via Sentoa <sentoa@lists.sentoa.org> wrote: >> >> We replaced the locker stay on our NT-32-238 with a gas strut, as the spring stay, if accidentally bumped would allow the locker lid to come crashing down. Despite my careful calculations, the gas strut is not quite strong enough. We just arrived in Brewerton, NY this afternoon. Tomorrow I will take a photo of the gas strut and post it here. >> Harry Hungate and Jane Lothrop >> Bessie. NT 32-238 >> >> On May 21, 2024, at 1:07 PM, Tom Patterson via Sentoa <sentoa@lists.sentoa.org> wrote: >> >> When I bought my NT32-251 (2005) last fall, it was missing the propane locker hold open. I measured the existing hardware hole spacing: 3/4” at bottom; 1 1/8” at lid, ~9” total spring length. >> >> I found the West Marine Hatch Arm #4914750, 10” length, $16.99 fit perfectly. >> I see there appears to be an identical product from Moonlite Marine WM Model # 414094 Mfg # 0314, 10” $18.99. >> >> <image0.jpeg> >> >> ~Tom Patterson >> NT32-251 (2005) >> PACIFIC LOON >> Pt. Richmond, CA >> >> On May 21, 2024, at 09:22, Tom Krahn via Sentoa <sentoa@lists.sentoa.org> wrote: >> >> Does anyone know the brand or where you could get a replacement for >> the stay in the cockpit locker (the one with the propane) on a 2007 >> 32? >> >> Tom Krahn >> >> Diana B. >> 32-285 >> Barrington, RI >> _______________________________________________ >> Sentoa mailing list -- sentoa@lists.sentoa.org >> To unsubscribe send an email to sentoa-leave@lists.sentoa.org >> >> _______________________________________________ >> Sentoa mailing list -- sentoa@lists.sentoa.org >> To unsubscribe send an email to sentoa-leave@lists.sentoa.org >> >> _______________________________________________ >> Sentoa mailing list -- sentoa@lists.sentoa.org >> To unsubscribe send an email to sentoa-leave@lists.sentoa.org > > > > -- > Sincerely, > > Dave Allen > Director of Product Support > Nordic Tugs, Inc. & Ocean Sport Boats > Office: 360.757.8847 > Direct: 360.757.8833 > Email: davea@nordictugs.com > > NOTICE: This email may contain confidential or privileged material and is intended for use solely by the above-referenced recipient. Any review, copying, printing, disclosure, distribution, or other use by any other person or entity is strictly prohibited. If you are not the named recipient, or believe you have received this email in error, please reply to the sender and delete the copy you received. Thank you. > > _______________________________________________ > Sentoa mailing list -- sentoa@lists.sentoa.org > To unsubscribe send an email to sentoa-leave@lists.sentoa.org