JT
James Trickett
Tue, Sep 1, 2026 12:10 AM
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.


James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.


James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
PB
Paul Bulk
Tue, Sep 1, 2026 12:15 AM
While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Aug 31, 2026, at 17:11, James Trickett via Sentoa sentoa@lists.sentoa.org wrote:
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<Wiper 1.jpeg>
<Wiper 2.jpeg>
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
> On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
>
> Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
>
> Thanks for your help.
>
>
> <Wiper 1.jpeg>
>
> <Wiper 2.jpeg>
>
>
> James
>
>
>
> James
>
> “This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
>
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
ML
Margaret Leahy
Tue, Sep 1, 2026 12:32 AM
Hubby says to soak it with WD-40 for several days. NT 32-204
Mike
Sent from Margaret's iPhone
On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <
sentoa@lists.sentoa.org> wrote:
While it is possible to get them off without destroying them, it’s too
frustrating to try and maybe not worth breaking the splined actuator. The
arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Aug 31, 2026, at 17:11, James Trickett via Sentoa <
sentoa@lists.sentoa.org> wrote:
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212
and am trying to figure out how to take the arm off without destroying
everything. Not saying that I have ever done such a thing in the past.
Following is what I see. I am not sure what is in the hole, a screw, a
??????
Thanks for your help.
<Wiper 1.jpeg>
<Wiper 2.jpeg>
James
James
“This email, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential information. If you are
not the intended recipient, please notify me immediately and destroy
this email and any copies. Thank you.”
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Hubby says to soak it with WD-40 for several days. NT 32-204
Mike
Sent from Margaret's iPhone
On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <
sentoa@lists.sentoa.org> wrote:
> While it is possible to get them off without destroying them, it’s too
> frustrating to try and maybe not worth breaking the splined actuator. The
> arms aren’t terribly expensive so I just cut them off.
>
> Paul Bulk
> Crown Prince
> Brentwood Bay, BC
> 32-191
>
> On Aug 31, 2026, at 17:11, James Trickett via Sentoa <
> sentoa@lists.sentoa.org> wrote:
>
> Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212
> and am trying to figure out how to take the arm off without destroying
> everything. Not saying that I have ever done such a thing in the past.
> Following is what I see. I am not sure what is in the hole, a screw, a
> ??????
>
> Thanks for your help.
>
>
> <Wiper 1.jpeg>
>
>
> <Wiper 2.jpeg>
>
>
> James
>
>
>
> James
>
> “This email, including any attachments, is for the sole use of the
> intended recipient(s) and may contain confidential information. If you are
> not the intended recipient, please notify me immediately and destroy
> this email and any copies. Thank you.”
>
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
>
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
>
DK
Dave Kircher
Tue, Sep 1, 2026 12:37 AM
I have NT 32-288 (2007)
Contact A M Equipment for wiper parts. The arms were so rusted, they needed to be cut off with an angle grinder. The people at AM Equipment are very helpful.
Dave Kircher
On Aug 31, 2026, at 5:16 PM, Paul Bulk via Sentoa sentoa@lists.sentoa.org wrote:
While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<Wiper 1.jpeg>
<Wiper 2.jpeg>
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
I have NT 32-288 (2007)
Contact A M Equipment for wiper parts. The arms were so rusted, they needed to be cut off with an angle grinder. The people at AM Equipment are very helpful.
Dave Kircher
> On Aug 31, 2026, at 5:16 PM, Paul Bulk via Sentoa <sentoa@lists.sentoa.org> wrote:
>
> While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
>
> Paul Bulk
> Crown Prince
> Brentwood Bay, BC
> 32-191
>
>>> On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
>>>
>> Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
>>
>> Thanks for your help.
>>
>>
>> <Wiper 1.jpeg>
>>
>> <Wiper 2.jpeg>
>>
>>
>> James
>>
>>
>>
>> James
>>
>> “This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
>>
>> _______________________________________________
>> Sentoa mailing list -- sentoa@lists.sentoa.org
>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
DB
david.boyuka@gmail.com
Tue, Sep 1, 2026 12:40 AM
I used a small gear puller to remove the arms. They came off easily without damaging the splines.
David Boyuka
“Tina Marie”
42 Nordic Tug
From: James Trickett via Sentoa sentoa@lists.sentoa.org
Sent: Monday, August 31, 2026 8:11 PM
To: sentoa@lists.sentoa.org
Cc: James Trickett jamestrickett88@gmail.com
Subject: [Sentoa] 2002 NT 32212 Window Wipers
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
I used a small gear puller to remove the arms. They came off easily without damaging the splines.
David Boyuka
“Tina Marie”
42 Nordic Tug
From: James Trickett via Sentoa <sentoa@lists.sentoa.org>
Sent: Monday, August 31, 2026 8:11 PM
To: sentoa@lists.sentoa.org
Cc: James Trickett <jamestrickett88@gmail.com>
Subject: [Sentoa] 2002 NT 32212 Window Wipers
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
DC
David Carlson
Tue, Sep 1, 2026 12:50 AM
Don’t cut it off use a wiper puller.
David Carlson
865-201-3191
On Aug 31, 2026, at 19:40, david.boyuka--- via Sentoa sentoa@lists.sentoa.org wrote:
I used a small gear puller to remove the arms. They came off easily without damaging the splines.
David Boyuka
“Tina Marie”
42 Nordic Tug
From: James Trickett via Sentoa sentoa@lists.sentoa.org
Sent: Monday, August 31, 2026 8:11 PM
To: sentoa@lists.sentoa.org
Cc: James Trickett jamestrickett88@gmail.com
Subject: [Sentoa] 2002 NT 32212 Window Wipers
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<image001.jpg>
<image002.jpg>
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Don’t cut it off use a wiper puller.
David Carlson
865-201-3191
On Aug 31, 2026, at 19:40, david.boyuka--- via Sentoa <sentoa@lists.sentoa.org> wrote:
I used a small gear puller to remove the arms. They came off easily without damaging the splines.
David Boyuka
“Tina Marie”
42 Nordic Tug
From: James Trickett via Sentoa <sentoa@lists.sentoa.org>
Sent: Monday, August 31, 2026 8:11 PM
To: sentoa@lists.sentoa.org
Cc: James Trickett <jamestrickett88@gmail.com>
Subject: [Sentoa] 2002 NT 32212 Window Wipers
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<image001.jpg>
<image002.jpg>
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
JT
James Trickett
Tue, Sep 1, 2026 2:10 AM
Thank you. I am speaking with Vanessa at A M. She keeps asking what the
shaft looks like, but catch 22, I need the wiper off first.
Cheers,
James
32-212
On Mon, Aug 31, 2026 at 17:32 Margaret Leahy via Sentoa <
sentoa@lists.sentoa.org> wrote:
Hubby says to soak it with WD-40 for several days. NT 32-204
Mike
Sent from Margaret's iPhone
On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <
sentoa@lists.sentoa.org> wrote:
While it is possible to get them off without destroying them, it’s too
frustrating to try and maybe not worth breaking the splined actuator. The
arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Aug 31, 2026, at 17:11, James Trickett via Sentoa <
sentoa@lists.sentoa.org> wrote:
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212
and am trying to figure out how to take the arm off without destroying
everything. Not saying that I have ever done such a thing in the past.
Following is what I see. I am not sure what is in the hole, a screw, a
??????
Thanks for your help.
<Wiper 1.jpeg>
<Wiper 2.jpeg>
James
James
“This email, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential information. If you are
not the intended recipient, please notify me immediately and destroy
this email and any copies. Thank you.”
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
Thank you. I am speaking with Vanessa at A M. She keeps asking what the
shaft looks like, but catch 22, I need the wiper off first.
Cheers,
James
32-212
On Mon, Aug 31, 2026 at 17:32 Margaret Leahy via Sentoa <
sentoa@lists.sentoa.org> wrote:
> Hubby says to soak it with WD-40 for several days. NT 32-204
> Mike
>
>
> Sent from Margaret's iPhone
>
> On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <
> sentoa@lists.sentoa.org> wrote:
>
>> While it is possible to get them off without destroying them, it’s too
>> frustrating to try and maybe not worth breaking the splined actuator. The
>> arms aren’t terribly expensive so I just cut them off.
>>
>> Paul Bulk
>> Crown Prince
>> Brentwood Bay, BC
>> 32-191
>>
>> On Aug 31, 2026, at 17:11, James Trickett via Sentoa <
>> sentoa@lists.sentoa.org> wrote:
>>
>> Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212
>> and am trying to figure out how to take the arm off without destroying
>> everything. Not saying that I have ever done such a thing in the past.
>> Following is what I see. I am not sure what is in the hole, a screw, a
>> ??????
>>
>> Thanks for your help.
>>
>>
>> <Wiper 1.jpeg>
>>
>>
>> <Wiper 2.jpeg>
>>
>>
>> James
>>
>>
>>
>> James
>>
>> “This email, including any attachments, is for the sole use of the
>> intended recipient(s) and may contain confidential information. If you are
>> not the intended recipient, please notify me immediately and destroy
>> this email and any copies. Thank you.”
>>
>> _______________________________________________
>> Sentoa mailing list -- sentoa@lists.sentoa.org
>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
>>
>> _______________________________________________
>> Sentoa mailing list -- sentoa@lists.sentoa.org
>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
>>
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
>
DK
Dave Kircher
Tue, Sep 1, 2026 3:25 AM
Here is the list I got from AM
Dave Kircher
NT 32-288
On Aug 31, 2026, at 7:10 PM, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
Thank you. I am speaking with Vanessa at A M. She keeps asking what the shaft looks like, but catch 22, I need the wiper off first.
Cheers,
James
32-212
On Mon, Aug 31, 2026 at 17:32 Margaret Leahy via Sentoa <sentoa@lists.sentoa.org> wrote:
Hubby says to soak it with WD-40 for several days. NT 32-204
Mike
Sent from Margaret's iPhone
On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <sentoa@lists.sentoa.org> wrote:
While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<Wiper 1.jpeg>
<Wiper 2.jpeg>
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
DK
Dave Kircher
Tue, Sep 1, 2026 3:30 AM
Try again.
On Aug 31, 2026, at 7:10 PM, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
Thank you. I am speaking with Vanessa at A M. She keeps asking what the shaft looks like, but catch 22, I need the wiper off first.
Cheers,
James
32-212
On Mon, Aug 31, 2026 at 17:32 Margaret Leahy via Sentoa <sentoa@lists.sentoa.org> wrote:
Hubby says to soak it with WD-40 for several days. NT 32-204
Mike
Sent from Margaret's iPhone
On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <sentoa@lists.sentoa.org> wrote:
While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<Wiper 1.jpeg>
<Wiper 2.jpeg>
James
James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
JT
James Trickett
Tue, Sep 1, 2026 3:44 AM
Thank you guys. I am understanding the concept of the puller. In most cases there is a nut holding the wiper blade onto a shaft. Undo the nut, puller arms under the body, drive the centre into the bolt, arm pulls up and off.
With mine, I am not sure what I am looking at. I do not see a nut to remove. I am surely missing something obvious. Just like I cannot find the ketchup bottle in the fridge after 20 minutes. It was behind the strawberries all of the time.

James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
On Aug 31, 2026, at 20:30, Dave Kircher d2kircher2@gmail.com wrote:
Try again.<IMG_6195.png>
While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
Paul Bulk
Crown Prince
Brentwood Bay, BC
32-191
On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org> wrote:
Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
Thanks for your help.
<Wiper 1.jpeg>
Thank you guys. I am understanding the concept of the puller. In most cases there is a nut holding the wiper blade onto a shaft. Undo the nut, puller arms under the body, drive the centre into the bolt, arm pulls up and off.
With mine, I am not sure what I am looking at. I do not see a nut to remove. I am surely missing something obvious. Just like I cannot find the ketchup bottle in the fridge after 20 minutes. It was behind the strawberries all of the time.

James
“This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
On Aug 31, 2026, at 20:30, Dave Kircher <d2kircher2@gmail.com> wrote:
Try again.<IMG_6195.png>
> On Aug 31, 2026, at 7:10 PM, James Trickett via Sentoa <sentoa@lists.sentoa.org> wrote:
>
>
> Thank you. I am speaking with Vanessa at A M. She keeps asking what the shaft looks like, but catch 22, I need the wiper off first.
>
> Cheers,
>
>
> James
> 32-212
>
> On Mon, Aug 31, 2026 at 17:32 Margaret Leahy via Sentoa <sentoa@lists.sentoa.org <mailto:sentoa@lists.sentoa.org>> wrote:
>> Hubby says to soak it with WD-40 for several days. NT 32-204
>> Mike
>>
>>
>> Sent from Margaret's iPhone
>>
>> On Mon, Aug 31, 2026 at 4:16 PM Paul Bulk via Sentoa <sentoa@lists.sentoa.org <mailto:sentoa@lists.sentoa.org>> wrote:
>>> While it is possible to get them off without destroying them, it’s too frustrating to try and maybe not worth breaking the splined actuator. The arms aren’t terribly expensive so I just cut them off.
>>>
>>> Paul Bulk
>>> Crown Prince
>>> Brentwood Bay, BC
>>> 32-191
>>>
>>>> On Aug 31, 2026, at 17:11, James Trickett via Sentoa <sentoa@lists.sentoa.org <mailto:sentoa@lists.sentoa.org>> wrote:
>>>>
>>>> Good afternoon everyone. I have a broken wiper on my Nordic Tug 32212 and am trying to figure out how to take the arm off without destroying everything. Not saying that I have ever done such a thing in the past. Following is what I see. I am not sure what is in the hole, a screw, a ??????
>>>>
>>>> Thanks for your help.
>>>>
>>>>
>>>> <Wiper 1.jpeg>
>>>
>>>>
>>>> <Wiper 2.jpeg>
>>>>
>>>>
>>>> James
>>>>
>>>>
>>>>
>>>> James
>>>>
>>>> “This email, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential information. If you are not the intended recipient, please notify me immediately and destroy this email and any copies. Thank you.”
>>>>
>>>> _______________________________________________
>>>> Sentoa mailing list -- sentoa@lists.sentoa.org <mailto:sentoa@lists.sentoa.org>
>>>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org <mailto:sentoa-leave@lists.sentoa.org>
>>> _______________________________________________
>>> Sentoa mailing list -- sentoa@lists.sentoa.org <mailto:sentoa@lists.sentoa.org>
>>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org <mailto:sentoa-leave@lists.sentoa.org>
>> _______________________________________________
>> Sentoa mailing list -- sentoa@lists.sentoa.org <mailto:sentoa@lists.sentoa.org>
>> To unsubscribe send an email to sentoa-leave@lists.sentoa.org <mailto:sentoa-leave@lists.sentoa.org>
> _______________________________________________
> Sentoa mailing list -- sentoa@lists.sentoa.org
> To unsubscribe send an email to sentoa-leave@lists.sentoa.org
