Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
I replaced mine at New Found Metals, not stainless, but work well.
Newfoundmetals.com. 8 “ worked for me.
Carpe Diem
37-116
Commencement Bay, Washington
Sent from my iPad
Rick Schmidtke
On Jan 6, 2024, at 9:00 AM, Rio DeGennaro via Sentoa sentoa@lists.sentoa.org wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
I got new stainless 8” porthole screens for my 2005 NT 37 from sailboatstuff.com http://sailboatstuff.com/ in Georgia. Part number LSR-08-SN.
Sadler
On Jan 6, 2024, at 12:00 PM, Rio DeGennaro via Sentoa <sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org> wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
Sentoa mailing list -- sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org mailto:sentoa-leave@lists.sentoa.org
Thanks. I'll give it a go!
Rio
From: sadler love via Sentoa sentoa@lists.sentoa.org
Sent: Saturday, January 6, 2024 1:05 PM
To: South East Nordic Tugs Owners' Association (SENTOA) sentoa@lists.sentoa.org
Cc: sadler love sadlerl@me.com
Subject: [Sentoa] Re: Porthole and forward hatch screen
I got new stainless 8” porthole screens for my 2005 NT 37 from sailboatstuff.comhttp://sailboatstuff.com/ in Georgia. Part number LSR-08-SN.
Sadler
On Jan 6, 2024, at 12:00 PM, Rio DeGennaro via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org> wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org
Portholes:Home
Ocean Air Skyscreen
Skyscreens for Virtually Any Hatch-Welcome Aboard
Best wishes
Stephen Hill
NT37-199
Tug’n
Sent from my iPhone
On Jan 6, 2024, at 12:00 PM, Rio DeGennaro via Sentoa <sentoa@lists.sentoa.org> wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
_______________________________________________
Sentoa mailing list -- sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org
I can vouch for the 8” Man Ship screens from sailboatstuff.com (LSR-08-SN). They were a great upgrade from the original equipment on 2009 tug.
When I purchased mine in 2013, they were offering a 5% discount for Nordic Tug owners. You might want to inquire if that is still a thing.

Steve Paul
Penny-wise
NT37-203
828 Casterline Rd.
Endicott, NY. 13760
C: 607.786.4024
On Jan 6, 2024, at 1:14 PM, Rio DeGennaro via Sentoa sentoa@lists.sentoa.org wrote:
Thanks. I'll give it a go!
Rio
From: sadler love via Sentoa <sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org>
Sent: Saturday, January 6, 2024 1:05 PM
To: South East Nordic Tugs Owners' Association (SENTOA) <sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org>
Cc: sadler love <sadlerl@me.com mailto:sadlerl@me.com>
Subject: [Sentoa] Re: Porthole and forward hatch screen
I got new stainless 8” porthole screens for my 2005 NT 37 from sailboatstuff.com http://sailboatstuff.com/ in Georgia. Part number LSR-08-SN.
Sadler
On Jan 6, 2024, at 12:00 PM, Rio DeGennaro via Sentoa <sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org> wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
Sentoa mailing list -- sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org mailto:sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org mailto:sentoa-leave@lists.sentoa.org
Regarding the forward hatch: yes, the screen is very tricky to hold in the exact place while turning the clips to hold it in place.
To make it much easier, I cut a 1” x 10” piece of 1/16” thick ABS black plastic and used double stick tape to attach it to the black outside frame to support the far end of the screen as I put it on.
Now, you can insert the screen so the far end is supported by the plastic strip, then turn the clips to hold the near side on and you’re done. I’ve attached a photo with blue arrows pointing to the black plastic strip. It’s very hard to see it in this photo. You can just see the closest end of it in the picture. The far end is not visible—black on black.
On Jan 6, 2024, at 12:00 PM, Rio DeGennaro via Sentoa sentoa@lists.sentoa.org wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
Sentoa mailing list -- sentoa@lists.sentoa.org mailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.org mailto:sentoa-leave@lists.sentoa.org
Great info... Thanks!
Rio
From: Stephen Paul via Sentoa sentoa@lists.sentoa.org
Sent: Saturday, January 6, 2024 2:17 PM
To: South East Nordic Tugs Owners' Association (SENTOA) sentoa@lists.sentoa.org
Cc: Stephen Paul sc.paul@me.com
Subject: [Sentoa] Re: Porthole Screens
I can vouch for the 8” Man Ship screens from sailboatstuff.com (LSR-08-SN). They were a great upgrade from the original equipment on 2009 tug.
When I purchased mine in 2013, they were offering a 5% discount for Nordic Tug owners. You might want to inquire if that is still a thing.
[Screenshot 2024-01-06 at 2.16.14 PM.png]
Steve Paul
Penny-wise
NT37-203
828 Casterline Rd.
Endicott, NY. 13760
C: 607.786.4024
On Jan 6, 2024, at 1:14 PM, Rio DeGennaro via Sentoa sentoa@lists.sentoa.org wrote:
Thanks. I'll give it a go!
Rio
From: sadler love via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org>
Sent: Saturday, January 6, 2024 1:05 PM
To: South East Nordic Tugs Owners' Association (SENTOA) <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org>
Cc: sadler love <sadlerl@me.commailto:sadlerl@me.com>
Subject: [Sentoa] Re: Porthole and forward hatch screen
I got new stainless 8” porthole screens for my 2005 NT 37 from sailboatstuff.comhttp://sailboatstuff.com/ in Georgia. Part number LSR-08-SN.
Sadler
On Jan 6, 2024, at 12:00 PM, Rio DeGennaro via Sentoa <sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org> wrote:
Hello all,
I am looking for porthole replacement screens for my 2008 NT37. I could find no manufacturer's stamp on the hardware.
I am also looking to solve an issue with my Bomar forward hatch. The way the screen frame is constructed, there is only about a
1/8" lip for the clips to slide over and the screen will fall outs without much encouragement!
Any solution to these issues will be welcome!
Rio DeGennaro
Ti Amo NT37-197
Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org
Sentoa mailing list -- sentoa@lists.sentoa.orgmailto:sentoa@lists.sentoa.org
To unsubscribe send an email to sentoa-leave@lists.sentoa.orgmailto:sentoa-leave@lists.sentoa.org
I got the Man Ship 8” round screens for my NT37 from Marine Depot Direct. https://www.marinedepotdirect.com/man-ship-round-portlight-screen.html https://www.marinedepotdirect.com/man-ship-round-portlight-screen.html
Excellent fit.
Dave Sire
m/v Tortuga
Edgewater, MD
Nordic Tug 37-171
Rio,
If you’d be interested in an upgrade for your Bowman hatch screen, you might look at the SeaBreeze shade screen. I contacted Pompanette/Bowmar and gave them my Bowman hatch model/serial number and they set me up with the right shade screen. Perfect fit. They’re not cheap; mine was around $350 with shipping, but it made things a lot easier and it also includes a shade. We might have the same hatch. Here are the details for my screen:
https://pompanette.com/store/deck-hatches/deck-hatches-accessories/seabreeze-shade-screen/product/seabreeze-series-22-1-8-in-x-22-1-8-in-square-hatch-shade-screen-system-gsb2022/ https://pompanette.com/store/deck-hatches/deck-hatches-accessories/seabreeze-shade-screen/product/seabreeze-series-22-1-8-in-x-22-1-8-in-square-hatch-shade-screen-system-gsb2022/
Dave Sire
m/v Tortuga
Edgewater, MD
Nordic Tug 37-171